Full Interior Detailing

​

Remove all personal belongings.

• Collect all personal items inside the car and place it safely in one compartment that will be returned back to the owner after the cleaning process​​ is completed.

​​

​Remove front seats and floor mats.

• Safety belt sensor cables and other electrical wiring underneath the seats are unplugged carefully before removing the seats.

• Both driver and passenger seats are removed carefully using proper tools including the loose floor mats that will be cleaned later.​

• This process is to ensure we have full access to the carpet floor in order to clean them.

​​

Vacuuming​.

• Vacuum the entire seat, floor mats, and carpet floor.

• Vacuum plastic trims, door jambs, main console, and all other plastic compartments included in the car using a detail brush.

 

Seat Wash​ (Fabric type)

• The method used for seat wash is Spray, Agitate, and Extract (SAE). 

• A decent amount of carpet solution is sprayed evenly towards the seat.

• Loosen the dirt trapped inside the seat by agitating it with a drill brush.

• Extract using an upholstery vacuum that will remove all dirt from the seat to clean them inside out. The process is repeated until all suction water turns white and transparent.

 

Seat Wash​ (Leather type)​

• A decent amount of All Purpose Cleaner (APC) is sprayed evenly towards the seat.

• Agitate the seat with a soft horsehair brush to remove all stains.

• A steamer is also used to remove hard stains that are trapped in the leather grains (depends on dirtiness).

• Rinse and wipe clean all accessive soap on the seat.

• Apply one layer of leather conditioner to nourish and restore flexibility in the leather. This will prevent it from drying out/cracking and keeping it feeling soft.​

 

Carpet wash​

• The method used for carpet wash is Spray, Agitate, and Extract (SAE).  

• A decent amount of carpet solution is sprayed evenly towards the carpet.

• Loosen the dirt trapped inside the seat by agitating it with a drill brush.

• Extract using an upholstery vacuum that will remove all dirt from the carpet to clean them inside out. The process is repeated until all suction water turns white and transparent.

 

Plastic care​

• A controlled amount of All Purpose Cleaner (APC) is sprayed on all plastic trims, door jambs, main console, and all other plastic compartments included in the car. A detail brush is used to reach the nooks and crannies of the main console and door jambs. A steamer is used to remove hard stains on frequently abused areas such as the footrest and the plastic divider in between doors.

• One layer of plastic protectant is applied to enhance the looks and protect all plastics surfaces from harmful UV rays.

 

Finishing​

• Attach all removed seats and connect the wiring underneath the seat.

• Re-vacuum all seats and carpet to remove dirt that was introduced after the cleaning process.

• Inspect all wirings and cleaned areas.

• Cover the driver's seat with a plastic cover (only applicable if the seat is still damp).

• Return all personal items to the owner.